JMC JIMMY 1993 Owner's Manual page 146

Featums & Controls
'tLaSler Wring Harness
Your vehicle may have either a 5-wire or 7-wire harness.
The light duty trailer wiring
is a 5-wire harness assembly taped and bundled
at the left corner
of the vehicle interior, next to the endgate. The harness has
no connector, and you should have a qualified service person wire your
harness for you. It must be routed out of your vehicle and attached so that
the trailer or the body won't pull it.
KO249
The heavy duty trailer wiring includes both
a 5-wire harness assembly (the
light duty trailer wiring) and a 2-wire harness assembly. The 2-wire harness is
stored under the vehicle along the rear crossmember. Both
the 5-wire harness
and the
%wire
harness have no connector and should
be wired by
a
qualified
service person. Attach the harness to the trailer, then tape
or strap
it
to your"
vehicle's frame
rail.
Be sure you leave it loose
enough so
the
wiring
doesn't
bend or break, but not
so loose that it drags on the ground.
Store the harness in its original place. Wrap the harness together and tie
it
neatly so it won't be damaged.
2-86