Replacing the bulbs
Before replacing a burnt-out bulb, make sure that the
new one matches the voltage and wattage
specifications in paragraph "Electric System" page
267.
Important
Have the lamps changed at a Ducati Dealer or
authorised Service Centre.
Undo the screw (1) and detach the lens (2) from the
turn indicator support.
The bulb has a bayonet joint: press and twist counter
clockwise to remove it. Remove the bulb, then fit the
new one by pressing and turning clockwise until it
clicks into its seat. Refit the lens by inserting the tab
in the corresponding slot in the turn indicator support.
Tighten the screw (1).
240
2
1
Fig. 178