CAME KRONO KR300 Installation Manual
Krono series utomation for swing gates
Hide thumbs
Also See for KRONO KR300:
- Installation instructions manual (32 pages) ,
- Installation manual (17 pages) ,
- Operation manual (65 pages)
Advertisement
Table of Contents
- 1 Read Carefully
- 2 General Conditions of Sale
- 3 Legend of Symbols
- 4 Reference Standards
- 5 Technical Features
- 6 Description of Parts
- 7 Overall Dimensions
- 8 Installation
- 9 Preliminary Checks
- 10 Standard Installation
- 11 Installing the Operator
- 12 Safety Instructions
- 13 Maintenance
- 14 Extraordinary Maintenance
- 15 Phasing out and Disposal
- 16 Conformity Declaration
- Download this manual
See also:
Instruction and Installation Manual
Advertisement
Table of Contents
Related Manuals for CAME KRONO KR300
Summary of Contents for CAME KRONO KR300
- Page 1 AUTOMATION FOR SWING GATES INSTALLATION MANUAL KR300 - KR310 - KR510 English...
-
Page 2: Read Carefully
Warning Sings (e.g. gate plate). (i.e. that for which it was expressly built for). Any other use is Special instructions and to be considered dangerous. Came Cancelli Automatici S.p.A. advice for users is not liable for any damage resulting from improper, wrongful •... -
Page 3: General Conditions Of Sale
3. ORDERS The sale agreement is executed once the written order is confirmed by Came Cancelli Automatici Spa or when the order is fulfilled by the company. Orders that are addressed, and signed by clients, to Came Cancelli Automatici SpA are deemed to be firm and irrevocable for 30 days starting from the date they are received by the company. -
Page 4: Legend Of Symbols
1000 3 Reference Standards The company CAME cancelli automatici is ISO 9001:2000 quality certified; it has also obtained the ISO 14001 environmental safeguarding certification. CAME engineers and manufactures all of its products in Italy. This product complies with the following legislation: see declaration of compliance. -
Page 5: Technical Features
4.2 Technical features Motoriduttore KR300 / KR310 Motoriduttore KR510 Motor power supply: 230V A.C. 50/60Hz Motor power supply: 230V A.C. 50/60Hz Max draw.: 1,1 A Max draw.: 1,1 A Power: 130W Power: 130W Opening time (90°): 22s Opening time (90°): 34s Thrust: 400 - 3000 N Thrust: 400 - 3000 N Duty Cycle: 30%... -
Page 6: Installation
5 Installation Installation must be carried out by expert qualified personnel and in full compliance with current regulations. 5.1 Preliminary checks Before installing, do the following: • Make sure the structure of the gate is sturdy, the hinges work and that the is no friction between moving and non-moving parts; •... -
Page 7: Standard Installation
5.4 Standard installation 6) Key-operated selector switch 1) Left-hand motor unit 7) Flashing light 2) Right-hand motor unit 8) Receiving antenna 3) Control panel 9) Photocell column 4) Radio reveicer 10) Radio transmitter 5) Safety photocell 5.5 Installing the operator... - Page 8 Warning: after establishing the best point to which you will secure the gate bracket, secure the bracket to the pillar and make sure the quotas shown in the table below are met. Pillar Hinge Gate leaf closed position Tab. 3 Gate leaves up to 3 m (KR3) Gate leaf up to 5 m (KR5) C max...
- Page 9 Weld the gate bracket to the gate leaf making sure the quotas shown in the table are met. Note: on non-metal gate leaves assemble and weld the two parts of the bracket and secure them with proper screws. Insert the bushing (lubricated) into the pillar bracket’s hole. The bracket has holes that allow the opening angle to be changed. Secure the tail joint to the bracket.
- Page 10 5.6 Connecting to the control panel For the electrical connection procedures, use the junction box and branching boxes. Connecting the 230V a.c. delayed closing gearmotor. ZA3N / ZM3E Control panel Connecting the 230V a.c. delayed opening gearmotor. Power supply 230V a.c. - 50/60 Hz 5.7 Outward opening installation Gate leaves up to 3 m (KR3) Weld the extra bracket to that of the pillar,...
- Page 11 Gate bracket Pillar bracket Extra bracket Connect the gearmotors to the panel as shown in the diagram. Connecting the 230V a.c. delayed closing gearmotor ZA3N/ZM3E Control panel Connecting the 230V a.c. delayed opening gearmotor Power supply 230V a.c. - 50/60 Hz...
-
Page 12: Safety Instructions
5.8 Manual release of the gearmotor Put the key in the lock and turn it to unhook the release lever and then remove the key; turn the release lever by 90° in either direction. To block the leaf, return the release lever to the original position. 6 Safety instructions Important safety instructions This product must only be employed for its originally intended use. -
Page 13: Maintenance
7 Maintenance 7.1 Periodic maintenance Periodic maintenance to be carried out by the end-user is as follows: wipe clean the glass surface of the photocells; check that the safety devices work properly; remove any obstructions. We suggest checking the state of lubrication and tightness of the anchoring screws on the operator. To check the efficiency of the safety devices, move an object in front of the photocells when gate is closing. -
Page 14: Extraordinary Maintenance
Periodic maintenance log for end-user (every 6 moths) Date Notes Signature 7.3 Extra-ordinary maintenance The following table serves to note down any extraordinary maintenance, repairs or improvements performed by specialised firms. N.B.: Any extraordinary maintenance must be performed by specialised technicians. Extra-ordinary maintenance log Installer’s stamp Operator name... -
Page 15: Phasing Out And Disposal
CAME Cancelli Automatici S.p.A. employs a UNI EN ISO 14001 certified and compliant environmental protection system at its plants, to ensure that environmental safeguarding. We ask you to keep protecting the environment, as CAME deems it to be one of the fundamental points of its market operations strategies, by simply following these brief guidelines when disposing. - Page 16 (+33) 4 91 60 69 05 (+49) 71 5037830 (+49) 71 50378383 CAME Automatismos S.a. CAME Automatismos S.a. CAME Americas Automation Llc CAME Americas Automation Llc C/juan De Mariana, N. 17-local 1560 Sawgrass Corporate Pkwy, 4th Floor 28045 Madrid -...