Drive Motor Stator - Maytag MTW6500TB Service Manual

Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.

DRIVE MOTOR STATOR

3 Terminals
WARNING
Electrical Shock Hazard
Refer to page 4-14 for the procedure for ac-
cessing the drive motor.
1. Unplug washer or disconnect power.
2. Disconnect the wire connector from the
drive motor terminals.
3. Set the ohmmeter to the R x 1 scale.
4. Touch the ohmmeter test leads to any
two of the three drive motor terminals.
The meter should indicate 31 Ω.
5-4