Event And System Administration Logs; Automatic Fault Recovery; Backup And Restore; Maintenance And Administration - Toshiba ID EDGE Description

Table of Contents

Event and System Administration Logs

Events such as station buttons pushed or lines accessed are stored in an Event Log. All

actions made by the System Administration user are logged. Both logs may be called up at

a later time.

The system can automatically correct certain conditions detected during operation. This

enables the system to continue operating normally without requiring correction.

The customer database can be backed up and restored automatically or manually sched-

uled. The customer database can be moved to a network drive or can be moved to another

location using FTP. The backup and restore functions can be performed locally or

remotely.

The Enterprise Manager terminal can be connected directly to the IPedge system or via the

customer's LAN as well as remotely over the Internet over the public network.

A regular IPedge system software upgrade can be performed. You can upgrade the Operat-

ing System without affecting your customer database.

This feature enables the IPedge system to provide separate service to multiple companies or

departments (tenants). PDNs, DIDs and incoming line groups (ILGs) can be assigned to one

through eight tenants. Each tenant can have different attendant or night bell assignments for day-

of-the week schedules using Day 1, Day 2, or Day 3 modes. This feature is enabled through system

programming.

Traffic Measurement

Technicians and System Administrators can monitor the effectiveness of the system

resources for proper traffic balance.These traffic statistics are necessary for the system

administrator to both monitor the effectiveness of the system and determine whether the

system has enough resources or improper traffic balance. No additional hardware is

needed to support Traffic Measurement.

IPedge General Description

01/12

Features

Tenant Services

Table of Contents