Toshiba ID EDGE Description page 122

Appendix – Specifications
IPedge Software License Requirements
IPedge Software License Requirements
The following table describes the content and use for each IPedge license.
Table 25 IPedge License Part Numbers
Part Number
I-EC-1A
I-EC-BZL-1A
1
I-EC-HDD
I-EC-PWR SUPPLY
I-EC-RL2-1A
I-EC-RL4-1A
I-EM-1A
I-EM-BZL-1A
I-EM-HDD
I-EM-PWR SUPPLY
I-EC-HDD
I-EC-PWR SUPPLY
I-EM-HDD
I-EM-PWR SUPPLY
I-BEZEL-KEY
I-EP-1A
I-EP-RL2-1A
License Part Numbers
I-CM-1
I-CM-STD1
I-CM-V1
I-CP-AUX
I-CP-CSTA
I-CP-SOFTIPT
I-CP-IPENET
108
edge
IP EC model rack mount server. Factory equipped with single 160GB SATA hard
drive, 4GB RAM, and all the necessary software to support IP
required, see the 4-post (I-EC-RL4-1A) or 2-post (I-EC-RL2-1A) rail kits sold separately.
Requires I-SYS-EC or I-SYS-EC-DSCNT license.
Optional custom red front bezel with Toshiba and IPedge logos for I-EC-1A server. Provides
a sleek look and secures accessibility. Includes two keys. (Buy extra bezel keys using the I-
BEZEL-KEY part number).
Spare 160GB SATA hard drive for IPedge model I-EC-1A servers.
Spare power supply for IPedge model I-EC-1A server.
Two post rail kit to mount IPedge server model I-EC-1A server in a two post server rack.
Four post rail kit to mount IPedge server model I-EC-1A server in a four post server rack.
IPedge EM model rack mount server. Factory equipped with a Linux operating system, two
300GB SAS hard drives in RAID1 configuration, 12GB RAM, dual redundant power
supplies, and all the necessary software to support IPedge features. System ships with one
4-post rail kit. Requires I-SYS-EM license.
Optional custom red front bezel with Toshiba and IPedge logos for I-EM-1A server. Provides
a sleek look and secures accessibility. Includes two keys. (Buy extra bezel keys using the I-
BEZEL-KEY part number).
Spare 300GB SAS hard drive for IPedge model I-EM-1A servers.
Spare power supply module for IPedge model I-EM-1A server.
Spare 160GB SATA hard drive for IPedge model I-EC-1A servers.
Spare power supply for IPedge model I-EC-1A server.
Spare 300GB SAS hard drive for IPedge model I-EM-1A servers.
Spare power supply module for IPedge model I-EM-1A server.
One spare key for the bezel locks for I-EC and I-EM custom bezels. Key fits both locks. As
needed for spares.
edge
IP EP server with AC adaptor. Requires I-SYS-EP license.
Optional I-EP-1A mounting bracket, used for installing system in 2 or 4 post server racks.
IPedge Call Manager Advanced License - per user. VoIP voice plug-in is sold separately.
IPedge Call Manager Standard version provides the screen based telephony and Outlook
Contact dialing. Bundled with IPedge user license and not required to purchase.
IPedge Call Manager Voice add-on License (voice plug-in license to add VoIP per user).
Requires I-CM-1
IPedge Auxiliary Channel license for each channel of Attendant Console, or ACD Voice
Announcement channel.
IPedge CSTA license - per application
One required for each SoftIPT user on IPedge. Also requires a user license (I-CP-USR-EM
or I-CP-USR-EC).
One required for each IPedge Net channel.
Description
edge
IPedge General Description
features. Mounting rails
01/12