Table of Contents
Advertisement
Ring tones are described, along with their cadences in
generation algorithm, the listed tone duration is slightly different from the actual one.
Table 9
Ring Tones
Tone Name
Internal/External Ring 1
Internal/External Ring 2
Internal/External Ring
11
Internal/External Ring
12
Internal/External Ring
13
Internal/External Ring
14
Internal/External Ring
15
Internal/External Ring
16
Internal/External Ring
17
Internal/External Ring
18
External/Internal Ring
for Standard
Telephones
Recall
Recall for Standard
Telephone
Ring Over Busy
(Internal)
Call Waiting (Internal)
Ring Over Busy
(External)
Call Waiting (External)
Volume Control -
Ringing Speaker
IPedge General Description
Description
Incoming call from internal or external
party to IP telephones. (10 different ring
tones are available with R1.3 or higher
software.)
Internal and External Ringing Cadence:
For Release 1.3 and higher, two types of
ringing cadences can be selected in
system programming.
A call is returned & needs to be
answered.
A call is returned & needs to be
answered.
Call rings an idle [DN] or CO line button
while phone is busy. Another internal call
offered to an idle button while the station
is busy.
Internal call is waiting for the busy
button. A call is camped-on to a busy
[DN] or CO line button.
Call rings an idle [DN] or CO line button
while phone is busy. Another incoming
call is offered to an idle button while
phone is busy.
External call is waiting for busy station. A
call is camped-on to a busy [DN] or CO
line button.
Adjusts speaker volume for ringing state.
01/12
Appendix – Specifications
Table
9. Due to the limitation in the tone
Ringing Cadence
500 Hz 1 sec. On, 3 sec. Off, repeat
1300 Hz 1 sec. On, 1 sec. Off, repeat
500/640 Hz 1 sec. On, 3 sec. Off, repeat
500/640 Hz 1 sec. On, 1 sec. Off, repeat
860/1180 Hz 1 sec. On, 3 sec. Off, repeat
860/1180 Hz 1 sec. On, 1 sec. Off, repeat
1300/1780 Hz 1 sec. On, 3 sec. Off, repeat
1300/1780 Hz 1 sec. On, 1 sec. Off, repeat
860/1180 Hz 0.5 sec. On, 1300/1780 Hz 3
sec. Off, repeat
860/1180 Hz 0.5 sec. On, 1300/1780 Hz 1
sec. Off, repeat
Ringing Type1: External Ring: 20Hz, 1sec.
On - 3 sec. Off
Internal Ring: 20Hz, 0.4 sec.On - 0.2 sec.
OFF
- 0.4 sec.On - 3 sec. Off
Recall:20Hz, 1sec. On - 1sec. Off
Ringing Type 2: Same Ringing Cadence as
DK.
External Ring: 20Hz, 0.4 sec. On - 0.2 sec.
Off
- 0.4 sec. On - 3 sec. Off
Internal Ring: 20Hz, 1 sec. On - 3 sec. Off
Recall: 20Hz, 1 sec. On - 3 sec. Off
2 kHz interrupted at 10 Hz, 1 sec. On, 1 sec.
Off, repeat.
20 Hz, 1 sec. On, 1 sec. Off, repeat.
2 kHz interrupted at 10 Hz, 1 sec. On, 3 sec.
Off, twice or repeat (For Call Waiting, twice
only).
2 kHz interrupted at 10 Hz, 2 bursts of 0.25
sec. apart 0.25 sec., twice apart 3 sec. or
continuous (For Call Waiting, twice only).
Standard telephones with Caller ID also
receive an 80 ms burst of CAS tone at -14 to
32dBM
500/640 Hz continuous.
System Tones
99
Advertisement
Table of Contents
