Dahua Smart Box Series User Manual page 312

Please refer to the following sheet for detailed information.
Parameter Function
Here you can select date format from the dropdown list.
Date format
There are two options: 24-H and 12-H.
Time
Format
The time zone of the device.
Time zone
It is to set system time. It becomes valid after you set.
System
time
Sync PC You can click this button to save the system time as your PC current
time.
Here you can set day night save time begin time and end time. You
DST
can set according to the date format or according to the week format.
NTP You can check the box to enable NTP function.
You can set the time server address.
NTP server
It is to set the time server port.
Port
It is to set the sync periods between the device and the time server.
Interval
5.8.5.1.3 Holiday Setup
Holiday setup interface is shown as in Figure 5-72.
Here you can click Add box to add a new holiday and then click Save button to save.
Standalone DVR User's Manual
Figure 5-71
302