Preview Control Interface - Dahua Smart Box Series User Manual

1 Recording status
Motion detection
2
Tips
Preview drag: If you want to change position of channel 1 and channel 2 when you
are previewing, you can left click mouse in the channel 1 and then drag to channel
2, release mouse you can switch channel 1 and channel 2 positions.
Use mouse middle button to control window split: You can use mouse middle
button to switch window split amount.

4.4.2 Preview Control Interface

Move you mouse to the top centre of the video of current channel, you can see system
pops up the preview control interface. See Figure 4-11 and Figure 4-12. If your mouse
stays in this area for more than 6 seconds and has no operation, the control bar
automatically hides.
1
1) Realtime playback
It is to playback the previous 5-60 minutes record of current channel.
Please go to the Main menu->Setting->->System->General to set real-time playback
time.
System may pop up a dialogue box if there is no such record in current channel.
2) Digital zoom
It is to zoom in specified zone of current channel. It supports zoom in function of
multiple-channel.
Click button , the button is shown as
There are two ways for you to zoom in.
Drag the mouse to select a zone, you can view an interface show as Figure 4-13.
3
4
1 2 3
Figure 4-11 Analog Channel
2 3 4
Figure 4-12 Digital Channel
.
Standalone DVR User's Manual
Video loss
Camera lock
4 5
6 7
138