Dahua Smart Box Series User Manual page 170

4.6.3.2 Motion Detect Snapshot
a) From Main menu->Setting->Camera->Encode->Snapshot, you can go to
snapshot interface. See Figure 4-45.
b) In Figure 4-45, select trigger snapshot from the dropdown list and then set
picture size, quality and snapshot frequency. Click OK button to save current
setup.
c) From Main menu->Setting->Event->Detect, here you can select motion detect
type, motion detect channel and then check the enable box. Please refer to
chapter 4.6.3.1.
d) Click OK button to complete motion detect setup.
Standalone DVR User's Manual
Figure 4-44
160