Dahua Smart Box Series User Manual page 155

Here you can control PTZ direction, speed, zoom, focus, iris, preset, tour, scan, pattern
aux function, light and wiper, rotation and etc.
Speed is to control PTZ movement speed. The value ranges from 1 to 8.The speed 8 is
faster than speed 1. You can use the remote control to click the small keyboard to set.
You can click and
brightness.
The PTZ rotation supports 8 directions. If you are using direction buttons on the front
panel, there are only four directions: up/down/left/right.
In the middle of the eight direction arrows, there is a 3D intelligent positioning key. See
Figure 4-21. Please make sure your protocol supports this function and you need to use
mouse to control.
Click this key, system goes back to the single screen mode. Drag the mouse in the screen
to adjust section size. The dragged zone supports 4X to 16X speeds. It can realize PTZ
automatically. The smaller zone you dragged, the higher the speed.
Name Function
key
Zoom
Focus
Iris
In Figure 4-20, click
etc. See Figure 4-22.
of the zoom, focus and iris to zoom in/out, definition and
Figure 4-20
Figure 4-21
function Shortcut
key
Near
Near
│ │ │ │
close ⊳
to open the menu, you can set preset, tour, pattern, scan and
Standalone DVR User's Manual
Function function
key
Far
Far
Open
Shortcut
key
►
│ │ │ │
145