Dahua Smart Box Series User Manual page 159

4.5.2.2 Call PTZ Function
Call Preset
In Figure 4-22, input preset value and then click
again to stop call.
Call Pattern
In Figure 4-22, input pattern value and then click
again to stop call.
Call Tour
In Figure 4-22, input tour value and then click
to stop call.
Call Scan
In Figure 4-22, input Scan value and then click
to stop call.
Rotate
In Figure 4-22, click
System supports preset, tour, pattern, scan, rotate, light and etc function.
Note:
Preset, tour and pattern all need the value to be the control parameters. You can
define it as you require.
You need to refer to your camera user's manual for Aux definition. In some cases, it
can be used for special process.
Figure 4-27
to enable the camera to rotate.
Standalone DVR User's Manual
to call a preset. Click
to call a pattern. Click
to call a tour. Click again
to call a tour. Click again
149