Initialising The Gps Receiver - Navigon 72xx User Manual

User's manual NAVIGON 72xx
The N
functions of the navigation application.
Tap on
►
into the foreground.
Tap on
►
window back into the foreground.

Initialising the GPS receiver

As soon as the navigation device has been switched on, initialisation of
the GPS receiver will begin.
The integrated GPS receiver is not initialised for the first time until the
navigation application is started for the first time. It can take up to
20 minutes to initialise the GPS receiver for the first time.
Note: If the GPS symbol indicates GPS Ready after far less than
20 minutes, it is advisable to leave the navigation device switched on
for at least another 15 minutes in order to ensure reliable operation of
the receiver.
Each time you switch on the navigation device after this, GPS reception
will start within a short time.
If the navigation device has not been switched on for more than a week,
it can take up to 10 minutes to re-initialise the receiver.
In the top right hand corner of the display, you will see the GPS symbol.
As soon as data from at least three satellites is received, the icon will
change to
Note: Initialisation takes the least time if you do not start driving until
the initialisation has finished.
For more details about the GPS symbol refer to chapter "GPS" on
page 16.
Returning to the Navigation window
The N
started.
If another window of the navigation application is open, tap on
(Back). This will return you to the window you came from.
Tap on
►
opened.
- 22 -
window is opened. From here you can access all the
AVIGATION
(Phone) in order to move the hands-free module
(Navigation) in order to move the N
(GPS Ready).
window opens when the navigation application is
AVIGATION
(Back) repeatedly until the N
AVIGATION
window is
AVIGATION
Navigation