Establishing A Connection From The Mobile Phone; Terminating The Connection And Deleting The Connection Data - Navigon 72xx User Manual

3. Tap on the name of your mobile phone.
The navigation device prompts you to enter a password.
4. Enter a four-digit password (any digits) in the Key box and tap on
OK.
Your mobile phone prompts you to enter a password.
5. Enter the same password as on the NAVIGON 72xx.
On the NAVIGON 72xx, the S
connection is established between the two devices.
6. Tap on
M
ODULE
7.6.2

Establishing a connection from the mobile phone

Note: Please consult the mobile phone's manual if you are uncertain
about how to carry out the following steps on the mobile phone.
1. Make sure that the Bluetooth function is activated on both the
mobile phone and the NAVIGON 72xx.
2. Using your mobile phone, search for other Bluetooth devices.
The navigation device is detected as NAVIGON.
3. Initiate a connection to the detected NAVIGON device.
The mobile phone prompts you to enter a password.
4. Enter a four-digit password (user-defined).
The NAVIGON 72xx prompts you to enter a password.
5. Enter the same password in the Key box as on the mobile phone
and tap on OK.
The H
established between the two devices. The name of the connected
mobile phone is displayed at the bottom edge of the screen.
7.6.3 Terminating the connection and deleting the connection
data
You can terminate the connection between the NAVIGON 72xx and the
mobile phone at any time.
Note: You don't need to terminate the connection manually. The
connection is terminated automatically when the mobile phone is moved
a distance of approximately10 m from the NAVIGON 72xx. In this case
the connection data are saved so that the connection can be restored
automatically when the mobile phone is close enough to the
NAVIGON 72xx again.
Handsfree Module
(Back) in order to return to the H
window.
M
ANDSFREE ODULE
User's manual NAVIGON 72xx
BT window opens. A
ETTINGS
window opens. A connection is
ANDSFREE
- 59 -