Selecting Destinations On The Map; Starting Navigation - Navigon 72xx User Manual

Navigation starts. The route profile used for the previous navigation will
be applied.
6.2.10

Selecting destinations on the map

You may select a destination directly on the map. This is a quick way to
select towns, streets and POI.
1. In the Show Map window, tap on N
If the Voice Command button is available in the N
window, tap on Options > Show Map.
2. Tap on
The map opens in Destination search mode.
3. Tap on the point to which you want to navigate.
Note: For details of how to change the map view so that your
destination is easily seen refer to the chapter "Map in Destination
search mode" on page 45.
The destination that you have selected appears under the cross
hairs.
The geographical coordinates of the destination and the
corresponding address are shown in the bottom third of the screen.
4. Tap on
The D
of the selected destination is displayed in the upper left-hand
corner.
5. Tap Take Me There.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 31. Please read on there.
6.2.11

Starting navigation

The map is open in Preview mode.
The navigation destination is depicted by a small flag. The route and the
estimated time of arrival are indicated.
Tap on the arrival time if you want to see the estimated driving time
►
instead.
Route Profile
The route is calculated on the basis of a route profile.
Navigation
(Destination search)
(OK)
M
ESTINATION ON AP
User's manual NAVIGON 72xx
AVIGATION
window opens. The detailed address data
.
AVIGATION
- 31 -