Configuring The Navigon 72Xx - Navigon 72xx User Manual

User's manual NAVIGON 72xx
1. In the S
Phone > Clear Connection Data.
You will be prompted to confirm that you want to terminate the
connection.
2. Tap on the OK button.
Note: After the connection is terminated, the NAVIGON 72xx is no
longer able to establish an automatic connection to a mobile phone,
including the same mobile phone as for the last connection.
The next connection to a mobile phone must be established manually
(refer to chapter "Connection with Mobile Phone" on page 58).
8

Configuring the NAVIGON 72xx

The S
NAVIGON 72xx to match your personal preferences.
Settings can be accessed via the options in the S
the options in many windows of the navigation application.
Tap on Options > Settings.
►
The S
Navigation, Route Profile, Map Display and General.
Tap on a button to open the corresponding settings window.
►
The settings of the individual windows are distributed over several
screen pages. You can toggle between them with the
and
Some settings can have only one of two values. These settings can be
recognised by the
The currently valid value is highlighted in white.
Tap on
►
Some settings can accept several different values. These settings can
be recognised by the
visible.
1. Tap on
A list with all possible values opens. The currently valid value is
marked.
- 60 -
BT window, tap on Connection with Mobile
ETTINGS
window is the starting point for customising the
ETTINGS
window of the navigation application has several buttons:
ETTINGS
(To the Right) buttons.
(Toggle) button. All possible values are visible.
(Toggle) in order to switch between the possible values.
(List)
(List) button. The currently valid value is
window and via
TART
(To the Left)
Configuring the NAVIGON 72xx