Initializing The Gps Receiver; Setting The Volume - Navigon 21MAX User Manual

Basic Operations
Starting the NAVIGON 21MAX

Initializing the GPS receiver

Note: GPS initialization requires data from at least three satellites. If GPS data is
not available, the receiver will not initialize.
Note: It can take up to 20 minutes to initialize the integrated GPS receiver for the first
time.
Note: Each time you turn on the device, GPS receiver initialization begins. When GPS
data is available, reception starts within one minute.
If the navigation device has been switched to standby for more than a week, the next
initialization can take up to 10 minutes.
In the upper right-hand corner of the display, the
data from at least 3 satellites is received, the symbol changes to
Note: If the GPS symbol displays GPS Ready after considerably less than 20 min-
utes, it is advisable to leave the receiver switched on for at least an additional 15 min-
utes to ensure reliable operation.
Caution! If you have connected the navigation device to the power supply via the
vehicle's cigarette lighter, remove the connector before you leave the vehicle standing
for a longer period of time.
As the GPS receiver requires a constant supply of power, it could drain the vehicle´s
battery.

Setting the volume

The volume of the spoken driving instructions can be adjusted during navigation.
With a map displayed:
1. Tap
The volume bar opens. It contains three buttons for adjusting the volume:
2. Tap
The volume bar closes.
20
( .
Volume
)
(
Louder
)
( Softer
)
( .
Volume on/off
)
( again.
Volume
)
NAVIGON 21MAX User's Guide
NAVIGON, INC.
symbol appears. As soon as
GPS
GPS Ready .
March 2008