Quitting Navigation - Navigon 72xx User Manual

Note: If you tap on the large arrow box, the current route instruction will
be repeated.
Tap on Options > Turn-by-Turn List to view detailed directions for
►
the route. (Refer to "Turn-by-Turn List" on page 48.)
Tap on
►
Destination search mode. (Refer to "Map in Destination search
mode" on page 45.)
Volume
The volume of the spoken driving instructions can be adjusted during
navigation.
1. Tap on
The volume bar opens. It contains three buttons for adjusting the
volume.
2. Tap on
The volume bar closes.

Quitting navigation

Tap on
prompt you to confirm.
Functions of the map in Navigation mode
When the map is open in Navigation mode, tap any point on the map.
Buttons with various functions will be displayed.
2D/3D: Changes between 2D and 3D mode. The symbol indicates the current
mode.
Day/Night: Changes between "Day" and "Night" display modes. The symbol
indicates the current mode.
Interim Destination: Opens the menu for entering an interim destination.
The navigation system will first guide you to this interim destination.
Afterwards you can continue your original navigation.
Skip Route Point: Tap this button to omit the next route point. This button is
active only when at least 2 route points still lie ahead of you. (Refer to
"Multi-leg routes" on page 33)
Navigation
(Destination search) in order to view the map in
(Volume).
(Louder),
(Volume) again or wait a few seconds.
(Back) in order to quit navigation. A dialog box will
User's manual NAVIGON 72xx
(Quieter), (Volume on/off).
- 43 -