Table of Contents
Advertisement
User's manual NAVIGON 72xx
Loading routes
1. Tap on Options > Saved Routes.
2. Tap on the route that you want to load.
3. Tap on Load Route.
The R
route points of the loaded route have been entered.
6.4.5
Calculating and displaying routes
It is possible to calculate and display a planned route on the map even
without GPS reception in order to get an impression of the journey.
The R
one route point have been entered.
Tap on Show Route.
►
The map opens in Preview mode.
The starting point and the route points are marked by flags. The
distance and the estimated trip time is given for each leg of the
route. The route and the estimated time of arrival are displayed for
the complete route.
Tap on the arrival time if you want to see the estimated driving time
►
instead.
6.4.6
Simulating routes
It is also possible simply to simulate navigation on a planned route.
Note: GPS reception is not necessary for simulation.
If you have planned a multi-leg route, only the first leg will be simulated.
You have calculated and displayed a route.
Tap on Options > Simulation.
►
The route will be recalculated for simulation purposes. Simulation
starts when calculation has finished.
Stopping simulation
You can stop simulation at any time.
Tap on
►
The R
6.4.7
Starting navigation
You have calculated and displayed a route.
- 36 -
P
OUTE
LANNING
P
window is open. The starting point and at least
OUTE
LANNING
(Back)
P
OUTE
LANNING
window opens. The starting point and the
window opens.
Navigation
Advertisement
Table of Contents
