Handsfree Module; Connecting To A Telephone - Navigon 72xx User Manual

Before a trip
If your trips are recorded in the logbook, a window for entering the trip's
key data is opened before navigation starts. You can also decide,
however, not to record the trip in question.
If you don't want to record the trip in question, tap on
►
(Cancel).
- OR –
1. Enter a name for this entry, e.g. "Trip to customerX", in the Logbook
Entry box.
2. Enter the mileage.
3. Tap on Reason for the Trip and select a reason for the trip from the
list of possibilities.
7

Handsfree Module

The hands-free function allows you to use the NAVIGON 72xx as a
hands-free module for your mobile phone.
Opening the hands-free module
Tap in the navigation application on
►
The H
Operating the hands-free module
All functions can be reached from the H
Tap on
►
application into the foreground.
Tap on
►
return again to the previously opened window.
7.1

Connecting to a telephone

The NAVIGON 72xx must be connected to a mobile phone in order for
you to use the telephone functions.
If the NAVIGON 72xx was last connected to the same mobile phone,
the connection will be established without further prompting.
Note: You can configure the automatic connection. (Refer to "Bluetooth
Function" on page 57)
Problems occurring when trying to establish a Bluetooth connection can
have various causes:
Handsfree Module
M
ANDSFREE ODULE
(Navigation) in order to move the navigation
(Back) in order to close the hands-free module and
User's manual NAVIGON 72xx
window opens.
ANDSFREE
(Phone).
M window.
ODULE
- 53 -