Configuring The Fm Transmitter; Configuring The Navigon 83Xx - Navigon 83 series User Manual

User's manual NAVIGON 83xx
Switching on the FM transmitter
1. In the N
FM Transmitter.
2. Tap on On.
3. Follow the instructions on the screen.
Note: The frequency selected in the FM T
set on the car radio. The navigation device must not be too far from the
vehicle antenna because the FM transmitter has a transmission range
of only a few metres.
Switching off the FM transmitter
1. In the N
FM Transmitter.
2. Tap on Off.
12.1

Configuring the FM transmitter

In the FM T
►
The S
Standard: Select the settings to be used by the FM transmitter for transmission
(Europe or USA).
Caution! These standards differ, for example in the powers of
transmission they define. Please note that you are not permitted to
transmit with the USA setting in the countries of the European Union.
13

Configuring the NAVIGON 83xx

The S
the NAVIGON 83xx to match your personal preferences.
Settings can be accessed via the options in the N
and via the options in many windows of the navigation application.
Tap on Options > Settings.
►
The S
Navigation, Route Profile, Map Display and General.
Tap on a button to open the corresponding settings window.
►
The settings of the individual windows are distributed over several
screen pages. You can toggle between these pages with the
(To the Left) button and the
- 78 -
window, tap on Options > Settings > Options >
AVIGATION
window, tap on Options > Settings > Options >
AVIGATION
RANSMITTER
window opens.
ETTINGS
window is the point from which you can start customising
ETTINGS
window of the navigation application has several buttons:
ETTINGS
RANSMITTER
window, tap on Options > Settings.
(To the Right) button.
Configuring the NAVIGON 83xx
window must be
window
AVIGATION