User's manual NAVIGON 7100 | 7110
Starting a recording
1. Tap on Options > Logbook.
2. Enter the required details.
3. Tap the Start button.
Stopping the recording
1. Tap on Options > Logbook.
2. Tap the Stop button.
Note: A dialog window opens when you have reached your destination.
Specify whether you would like to end logbook recording or not.
11
Configuring NAVIGON 7100 | 7110
The S
to suit your personal requirements.
The settings can be reached via the options of several windows.
Tap on Options > Settings.
►
The S
Current Map, POI, Basic Settings and Route Profile.
Tap a button to open the corresponding settings window.
►
The settings of the individual windows are distributed on several
windows. You can toggle between these windows with the
Some settings can only accept two or three different values. These
settings can be recognised by the
values are visible. The value that is currently valid is highlighted in
black.
Tap the
►
values.
- 50 -
window is where you can adapt NAVIGON 7100 | 7110
ETTINGS
window has several buttons:
ETTINGS
(To the Left) and
(Toggle) button to alternate between the potential
(To the Right) buttons.
(Toggle) button. All potential
Configuring NAVIGON 7100 | 7110