Using Your Machine - Nautilus Be Strong NS 200X Owner's Manual

Weight Selection and
Adjustment
To adjust weight, make certain
weight stack is not in use or lifted.
Simply pull the weight pin from
the weight stack and select the
desired weight. Insert pin
completely and make certain it is
locked into place before lifting. In
general, always start with lower weights and work up to
find the weight most appropriate for your goals and capacity.
Lower Seat Adjustment
To adjust the lower seat, pull the
seat pin from the side of the
machine. Facing the machine, the
adjustment is on the right side,
under the seat. This adjustment
cannot be done while you are
sitting on the seat, so you'll want
to position yourself back on the
seat after the adjustment to ensure
proper seat alignment. Proper seat
alignment ensures exercise
efficiency and comfort, while reducing the risk of injury.
Seat Back Adjustment
Proper arm length extension for
seated rows, chest presses, rear
delts, etc. Completed through
using the commercial-grade ratchet
adjustment. Simply pull the seat
back forward until it rests in the
correct position.

USING YOUr MAChINE

press Arm Adjustment
This pop pin adjustment allows
proper positioning of all chest
exercises, seated rows, and moves
the arms out of the way for storage.
Simply pop the pin out and move it
until you reach a comfortable arm
position. As a general rule, never
start chest exercises behind your
shoulders.
Dual Grip handles
The Nautilus NS200X offers a variety of
grip placements for user comfort and
muscle isolation. Be sure to use the
proper grip for each of your
exercises.
Nautilus NS00X