Nautilus BE STRONG NS 75X Assembly Manual page 9

STEP 1
NS200X,NS300X & NS600X
RIGHT OR LEFT SIDE
(OPPOSITE OF WEIGHT
STACK)
NS 700X
RIGHT SIDE ONLY
Note: If NS75X is attached to NS700X
use 3/8" x 3 1/2" Hex Bolt
Step 1 Components:
# component
2 Connecting Tube Assembly
5 Vertical Pulley Bracket
32 Hex Bolt - 3/8" x 3 1/4"L
33 Hex Bolt - 3/8" x 3"L
40 3/8" Flat Washer
43 3/8" Lock Nut
45 Hex Bolt - 3/8" x 3 1/2"L
ASSEmBLY
33
3/8" x 3"L
2
2
A. Attach the Connecting Tube Assembly (2) to the gym
with hardware shown above. If using a NS200X,NS300X or NS600X
Procedure:
Qty a. Attach the Connecting Tube Assembly (2) to the gym
with hardware shown above. If using a NS200X,NS300X or NS600X
1
gym, remove the Cable Bracket and the rear bolt on the
1
gyms foot plate.
1
B. If using a NS200X,NS300X or NS600X attach the Vertical Pulley
3
Bracket (5) to the connecting Tube Assembly (2) using the hardware
8
shown above.
6
c. Tighten all hardware securely.
2
5
33
3/8" x 3"L
32
3/8" x 3 1/4"L
40
33
3/8" x 3"L
43
40
LEG PRESS CABLE
REMOVE CABLE
BRACKET
43
LEG PRESS CABLE
Nautilus NS75X