Nautilus BE STRONG NS 75X Assembly Manual page 10

STEP 2
4
3
33
3/8" x 3"L
1
Step 2 Components:
# component
1 Main Base Assembly
3 Seat Tube Assembly
4 Seat Handle
16 Seat Back Support Assembly
32 Hex Bolt - 3/8" x 3 1/4"L
33 Hex Bolt - 3/8" x 3"L
34 Hex Bolt - 3/8" x 2 3/4"L
40 3/8" Flat Washer
43 3/8" Lock Nut
10
ASSEmBLY
3/8" x 3 1/4"L
3/8" x 2 3/4"L
34
32
33
3/8" x 3 1/4"L
3/8" x 3"L
40
Procedure:
Qty a. Position the Seat Back Support Assembly (16) over the
rear holes of the Main Base Assembly (1) and position
1
next to the Connecting Tube Assembly (2). Secure parts
1
with hardware shown above, but do not tighten.
2
B. Slide the Seat Tube Assembly (3) over the Seat Back
1
Support Assembly (16) and the Main Base Assembly (1).
6
Secure parts with hardware shown above, but do not
4
tighten.
1
c. Attach the Seat Handles (4) to the Seat Tube Assembly
22
(3) using the hardware shown above. After the cable is
11
routed in Step #6
D. Tighten all hardware securely.
32
16
43
2