Nautilus BE STRONG NS 75X Assembly Manual page 11

STEP 3
13
Step 3 Components:
# component
8 Leg Press Top Link
9 Foot Plate Assembly
10 Leg Press Front Link Left
11 Leg Press Front Link Right
12 Leg Press Rear Link Left
13 Leg Press Rear Link Right
14 Leg Press Power Arm
15 Leg Press Power Link
29 Pivot Shaft
31 Hex Bolt - 1/2" x 3"L
38 Button Head Screw -
3/8" x 3/4"L w/ Thread Lock
39 1/2" Flat Washer
42 1/2" lock Nut
ASSEmBLY
29
11
38
8
39
31
15
14
42
12
Procedure:
Qty a. Attach all the Pivot Shafts (29) to the Leg Press Front
Link Right (11) and the Leg Press Rear Link Right (13)
1
using the hardware shown above.
1
B. Slide the shafts into position on the Main Base Assembly.
1
c. Slide the Leg Press Top Link (8) and the Leg Press
1
Power Arm (14) into position as shown above.
1
D. Position the Leg Press Front and Rear Link Left (10, 12)
1
over the shafts and attach with the hardware shown above.
1
e. Connect the Leg Press Power Arm (14) to the Leg Press
1
Top Link (8) using the Leg Press Power Link (15) and the
5
hardware shown above. Intsall short end of Leg Press
2
Power Link (15) up.
F. Attach the Foot Plate Assembly (9) to the Leg Press Top
15
Link (8) using the hardware shown above.
4
G. Tighten all hardware securely.
2
9
1/2" x 3"L
10
38
3/8" x 3/4"L w/ THREAD LOCK
Nautilus NS75X
11