Solution Filter Cleaning; Machine Speed Adjustment - Nilfisk-ALTO SCRUBTEC 343.2 User Manual

SOLUTION FILTER CLEANING

1.
2. Make sure that the switches (62 and 63) are turned to "0".
3. Close the solution valve (A, Fig. 9) under the machine, in front of the left rear wheel.
The valve (A) is closed when it is in the position (B) and it is open when it is in the position (C).
4.
(G).
NOTE
5. Open the valve (A) by turning it to position (C).

MACHINE SPEED ADJUSTMENT

NOTE
1. Adjust the machine speed with the handwheel (53) according to the following procedure:
Turn it counter-clockwise to increase the machine speed.
Turn it clockwise to decrease the machine speed.
2.
(52) by turning it clockwise or counter-clockwise.
3. With the machine ready to operate, perform hands-on tests of the machine and other adjustments if necessary.
Bedienungsanleitung auf www.gluesing.net
C
A
B
Figure 9
9099636000 - SCRUBTEC 343.2
USER MANUAL
G
F
E
D
ENGLISH
P100646
21