Machine Start And Stop - Nilfisk-ALTO SCRUBTEC 343.2 User Manual

ENGLISH

MACHINE START AND STOP

Starting the machine
1. Prepare the machine as shown in the previous paragraph.
2. Lower the squeegee (11) with the pedal (19).
3. Turn the main switch (62) to "I", to turn on the brush motor.
4.
on, the machine is ready to be used. If the yellow or red LED turns on, the batteries must be charged (see the procedure in
Maintenance chapter).
NOTE
5. Turn the switch (63) to "I", to turn on the vacuum system motor.
6.
to the following table:
LEDs on (65)
Setting
7. To start scrubbing/drying, keep the hands on the handlebar (2) and start the machine by pressing the brush enabling push-
buttons (61).
Stopping the machine
8. Release the brush enabling push-buttons (61).
9. Turn the switch (63) to "0", to turn off the vacuum system motor.
10. Turn the switch (62) to "0", to turn off the brush motor.
11. Engage the positioning pin (24) and activate the machine transport/parking device (23a) to keep the brush/pad-holder lifted
(see Fig. 5).
12. Make sure that the machine cannot move independently.
NOTE
consumption.
CAUTION!
14
Bedienungsanleitung auf www.gluesing.net
USER MANUAL
SCRUBTEC 343.2 - 9099636000