Table of Contents
Advertisement
Inclines
This cleaner is designed for use
on level surfaces with a maxi-
mum incline of 2% only.
Stationary cleaner
When the cleaner is stationary,
switch off the brush unit imme-
diately to prevent damage to the
floor covering.
2 Description
2.1
Purpose of the machine
Cleaning agents
Only use cleaning agents ap-
proved by Nilfisk-Alto.
Maintenance
Service and repair work should
be carried out by persons with
technical and legal authorization
only.
All single-disc cleaners are de-
signed to clean and care for floor
coverings inside buildings only.
Any other use is considered as
improper use. The manufacturer
accepts no liability for any dam-
age resulting from such use. The
risk for such use is borne solely
by the user.
The cleaners are suitable for
commercial use, e.g. in hotels,
schools, hospitals, etc.
Proper use also includes proper
operation, servicing and repairs
as specified by the manufac-
turer.
Observe the relevant accident
prevention regulations and any
other generally accepted safety
and working regulations.
When cleaning and servicing
the cleaner, replacing parts or
changing mode of operation,
switch off the cleaner and un-
plug it.
The manufacturer accepts no li-
ability for damage resulting from
any changes made to the clean-
er by the user.
Before using the cleaner, check
whether floor coverings are suit-
able for this cleaning technique.
Beware of area compression in
point-elastic floors, e.g. in gym
halls.
The manufacturer accepts no li-
ability for damage to the clean-
er and the cleaned floor that
is caused by the use of wrong
brushes and cleaning agents.
SPINTEC 343
SPINTEC 343 H
english
3
Advertisement
Table of Contents
