Care And Daily Cleaning - Siemens TK 70 N 01 Operating Instructions Manual

Power save mode
The power save mode can be changed from
Power save // on to Power save // off.
Warming plate
The function of warming plate 6
can be changed from Warmplate // on
to Warmplate // off.
Note:
The Descaling procedure and Descaling
alarm functions are required to descale the
appliance, see chapter on Descaling".

Care and daily cleaning

d
Risk of electric shock!
Before cleaning the appliance, pull out the
mains plug.
Never immerse the appliance in water.
Do not use a steam cleaner.
S
Rinse all loose parts by hand only
S
Wipe the housing with a damp cloth.
Do not use abrasive cleaning agents.
S
Rinse out the water tank 8 with water only.
S
Pull out the drip tray 14 and capsule
container 15 (Fig. 6).
Clean everything with a mild detergent
solution.
When re inserting the tray and container,
ensure that the parts are correctly positioned
with respect to each other.
S
First pull out the coffee outlet 18 and then
the capsule support 19 (Fig. 8).
S
Clean with a detergent solution and a soft
brush (not dishwasher proof).
S
First re insert the capsule support 19 and
then the coffee outlet 18 (Fig. 9).
Downloaded from CoffeeMachineManual.com Manuals
Nozzle 13 for hot water/steam
S
Unscrew nozzle 13 from the steam pipe.
S
Dismantle all parts (Fig. 7).
S
Clean with a detergent solution.
Clean the nozzle tip 13/c at the front with
a blunt needle.
S
Rinse all parts with clear water and dry.
CAPPUCCINO/CAFFELATTE
Frothing device 12
The individual parts of the
CAPPUCCINO/CAFFELATTE frothing
device 12 must always be clean.
Even the smallest amount of milk residue
will impair the frothing result.
Therefore, after using the frothing device 12,
always rinse immediately with water.
To do this:
S
Insert the hose in a vessel filled with cold
water.
S
Place a second vessel under the outlet
of the frothing device 12.
S
Set the selector on the frothing device 12
to CAFFELATTE.
S
Press button 4.
S
If Steam and Ready are indicated alternately
on display 5, put the hot water/steam lever 9
in a horizontal position.
S
Rinse the frothing device 12 for approx. ten
seconds.
S
Put the hot water/steam lever 9 back in the
upright position.
Depending on use, the frothing device 12
should be dismantled and cleaned at least once
a week.
S
Pull the frothing device 12 down off the
steam pipe 10 (Fig. 5/b).
S
Dismantle the frothing device 12 (Fig. 5/a).
S
Clean the individual parts carefully with a
detergent solution.
S
Rinse all parts with clear water and dry.
en
19