ENGINE MECHANICAL
-
CYlinder Head
EM5969
5.
REMOVE ACCELERATOR CONNECTING ROD
6.
REMOVE INTAKE MANIFOLD
(a)
(w,z
ACSD)
Remove
the
No.
4 water by-pass pipe
with
hoses.
(b)
(1
1
B
and 148)
Remove
the two
bolts, nuts and intake heater
or
intake flange
with
intake shutter.
Remove
the five nuts and three bolts
holding the
dipstick clamp, and intake manifold from the cylinder
head.
Remove
the intake manifold
and
gasket.
7.
REMOVE WATER OUTLET ASSEMBLY
(a)
Remove
the two nuts holding the water outlet
hous-
ing to the cylinder
head.
(b)
Disconnect
the water
by-pass hose
from the
water
pump, and remove the water outlet assembly
with the
by-pass
hose.
(c)
(d)