Assembly Of Injection Pump - Toyota 3b Repair Manual

FUEL SYSTEM
-
lnjection Pump
FU-33
BN
I
10.
IF NECESSARY, REPLACE OIL SEAL
(a)
Using a screwdriver, push out the oil
seal.
NOTICE:
Be
careful not to damage to the pump body.
(b)
Apply MP grease to the lip of a new oil
seal.
(c)
Using a socket wrench, drive in the oil seal until
its
surface is flush
with the pump housing.
ASSEMBLY OF INJECTION PUMP
(See pages
FU-22 and 23)
1.
INSTALL REGULATOR VALVE
Using SST, install and torque the regulator
valve.
ssT
09260-540
1
2 (09262-54020\
Torque:
9O
kg-cm (78 in.-lb,
8.8
N.m)
2.
INSTALL FEED PUMP
(a)
lnstall the liner, rotor and four
blades.
(b)
Check
that the liner and
blades are facing
in
the
correct direction, as shown.
(c)
Check that
the
blades move smoothly.
(d)
lnstall the pump cover with the two screws and check
that the rotor moves smoothly.
HINT:
Check
that the fuel outlet hole of the
cover
is
aligned
with the
liner.
is
te