Toyota 3b Repair Manual page 128

e
e
a-g\
E
F
g
O
Fher.
6.
[w,z HAC]
REMOVE PNEUMATIC BELLOWS
(a)
Remove
the four bolts,
pneumatic bellows cover
and O-ring.
(b)
Remove the
cap, bellows, push rod and spring.
(c)
Turn the guide bushing counterclockwise
to
remove
it.
7.
[1 1
B
and
14Bl
REMOVE DASH POT
8.
REMOVE GOVERNOR COVER
(a)
Using an allen wrench
remove the four
bolts.
(b)
Disconnect the
speed control spring from the spring
seat and
then
remove
the
spring seat and
damper
spring.
(c)
Remove
the governor
cover
with the
gasket.
9.
[w,zHAGl
REMOVE CONTROL LEVER FROM GOVERNOR
COVER
(a)
Using an allen wrench, remove the two bolts and the
gaskets.
(b)
Remove
the support pin and control
lever.
10.
[w,zHAC]
REMOVE CONNECTING PIN FROM GOVERNOR
COVER
(a)
Using an allen wrench, remove
the screw plug with
the
gasket.
(b)
Using pliers,
pull out the connecting
pin.
NOTICE:
Tape the
tip of the pliers, and be careful not
damage the connecting pin.
Damping
Spri
Speed Control
Spring
Seat
Spring
\