Network Extension Calling; Network Flash Transfer; Network Hold; Network Paging - Panasonic ICX Section 700 Technical Manual

Hide thumbs Also See for ICX Section 700:
Table of Contents

Advertisement

Chapter 3. System Features
FF6-2-05: Digit Modify Table - Add Ending Digits
FF6-2-05-0005: Numbering Plan
FF6-2-06: Authorization Code (UK Only)
FF6-2-09-0001: Dialing Access Voice Mail System
FF1-0-04: Trunk COS (Priority Message - Waiting Send/Cancel)
FF8-1-05: Call-Forward ID Codes for Voice Mail
FF8-1-06: MSG Key ID Codes (USA only)

Network Extension Calling

Network Extension Calling allows you to reach an extension on another PBX. Based on the number
you dial, the System network routes the call automatically.

Network Flash Transfer

CPC-96, CPC-288, and CPC-576 Version 3.5
When three or more systems are networked together with one DBS 576 as the tandem, Network Flash
Transfer determines where a call is held when Network Hold is pressed.
Related Programming
FF1-0-04: Trunk COS (Network Flash Forwarding)

Network Hold

CPC-96, CPC-288, and CPC-576 Version 3.5
Network Hold allows the user to place a call on hold by pressing a programmed line key or MCO key.
When using Network Hold, you cannot establish a conference call between nodes, and only one party
can place the call on hold.
Related Programming
FF1-0-04: Trunk COS (Broker's Hold for Network Calls)
FF1-1-01-0020: Network Flash Signal Timer
FF1-2-02: FF Dial Codes: Plan A (Network Flash Send During Intercom Dial Tone)
FF1-2-03: FF Dial Codes: Plan B (Network Flash Send During Intercom Dial Tone)
FF4-0-BSSC-0: FF-Key Assignment (Network Flash During Talk on FF-key)

Network Paging

Network Paging allows users on one System to page on another System when the appropriate Class of
Service (COS) allows.

Network Transfer Recall

CPC-96, CPC-288, and CPC-576 Version 3.5
Network Transfer Recall allows a call which has been transferred to another node to recall back to the
transferring extension.

Tandem Connection

Tandem Connection allows calls that are received over the network tie lines to be automatically routed
on to another PBX or out to the public network.
54
ICX (International), issued March/1998
Section 700 - Operation
ICX-35-700

Advertisement

Table of Contents
loading

Table of Contents