Table of Contents
Advertisement
Chapter 7. SLT Features
3. Dial the number of the party you wish to add to the call.
4. Hookflash when your call is answered.
5. To add additional parties, repeat steps 1-4
6. To drop out of the conference call, hang up.
Hardware Requirements
•
A Conference Card (VB-44120) must be installed in the System in order to conference more than
three parties.
Considerations
•
If all the internal parties hang up, the conference call will be disconnected. If the internal party
remains in the conversation, the conference call remains in progress.
•
When three parties are conferenced, a built-in 3-party conference circuit is used. If no 3-party
conference circuit is available, a conference cannot be established.
•
When a fourth party is added, the conference is moved to a conference circuit on the 8-party
conference card. If an 8-party conference circuit is not available, a fourth party cannot be added
to a conference.
•
Once an 8-party conference circuit is used, it continues to be used as long as the conference
continues.
•
An 8-party conference card supports up to four 8-party conference circuits. However, the card
must be placed in cabinet slots 1, 5, or 9 to support more than one 8-party conference circuit (and
jumpered accordingly).
Do-Not-Disturb (DND)
CPC-96, CPC-288, and CPC-576 All Versions
Description
You can make an extension unavailable by activating the Do-Not-Disturb (DND) feature. When DND
is activated, calls to that extension receive busy tone.
You can set or cancel DND from either your extension or from an alternate extension.
Operation
To set DND for your own extension:
1. Lift the handset.
2. Enter the DND Set code (default = 720 [UK/HK] or 720#
[Taiwan, Malaysia, Indonesia]).
3. Replace the handset.
280
Action
Action
ICX (International), issued March/1999
Section 700 - Operation
Result
Result
Intercom dial tone
ICX-35-700
Advertisement
Table of Contents
