Set Day Of Week Mode - Panasonic ICX Section 700 Technical Manual

Section 700 - Operation
Operation
To set a Caller ID Logging Extensions using either a large-display or small-display
phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 10.
3. Press the HOLD key.
4. Press the HOLD key.
5. Enter log control number.
6. Press the HOLD key.
7. Dial the extension number.
8. Press the HOLD key to store the entry.
9. To set CID Log for additional extensions, press the volume
up and down key or press the HOLD key to move to the
desired Extension.
10. Repeat steps 6-8 until all extension are entered.
MEMORY
11. Press the
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Considerations
• N/A

Set Day of Week Mode

Description
(For a description of Automatic Day/Night System Mode, see "Automatic Day/Night Mode" on page
37.)
The System allows you to specify up to 3 mode patterns. This menu item determines which pattern to
follow for a given week day in the month (i.e., first Monday, second Monday, etc.).
ICX-35-700
Action
key to exit the entry mode.
ICX (International), March/1999
Chapter 4. User Maintenance
Result
81-
User MAINT displays
8110-
CID Logging EXT displays
CID Logging # displays
Next log control # displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
81