Table of Contents
Advertisement
Chapter 5. Key Telephone Features
Considerations
•
You must pre-program the desired calling information into the telephone's Voice Recognition
Unit in order for the System to recognize the verbal commands.
Volume Control
CPC-96, CPC-288, and CPC-576 All Versions
Description
The System allows you to set different receiving volumes for the handset, speaker, intercom ring tone,
and incoming ring tone.
Operation
To adjust the volume while your phone is in use:
1. Press the VOLUME up or down key:
• During ringing to adjust intercom or incoming ring tone
• During a call to adjust handset or speaker volume
To adjust ringer volume while your phone is idle:
1. Press the ON/OFF key.
2. Press the PROG key.
3. Enter 9, then 1 to adjust the incoming ring tone.
OR...
Enter 9, then 2 to adjust the intercom ring tone.
4. Press the VOLUME up or down key to adjust the loudness
of the tone.
5. Press the ON/OFF key.
Hardware Requirements
•
N/A
Considerations
•
Extension programming determines whether or not you can set separate volume levels for trunk
incoming ring tone and intercom ring tone.
204
Action
Action
ICX (International), issued March/1999
Section 700 - Operation
Result
Intercom dial tone
Result
Pseudo ring tone
ICX-35-700
Advertisement
Table of Contents
