Table of Contents
Advertisement
Section 700 - Operation
To delete an SSD number:
1. Lift the handset or press the ON/OFF key.
2. (A) Press the PROG key.
(B) Press the MEMORY key.
OR...
(A) Enter the Speed Dial Set/Clear code (default = 710
[UK/HK] or 710# [Taiwan, Malaysia, Indonesia]).
3. Enter the SSD bin number (00-79 or 000-799).
4. Press the HOLD key.
5. Replace the handset or press the ON/OFF key.
Hardware Requirements
•
N/A
Considerations
•
If numbers do not appear on the display when you use SSD codes (00-79 or 000-799), your
extension is not programmed to display that data.
•
The System can be programmed to allow SSD numbers to override toll restrictions.
Speed Dial Linking
You can automatically link together up to 6 SSD numbers in 1 PSD bin to handle telephone numbers
longer than 24 characters. You can then dial the entire number by pressing the programmed PSD key
or by entering the speed dial bin number.
Alternatively, any combination of PSDs and SSDs can be manually linked together by pressing the
keys in the desired sequence. This can be useful for prepending account codes or long distance carrier
access codes, etc.
Note: Before linking multiple SSD numbers to a PSD bin, the SSD bins must already have been
programmed with the appropriate speed dial information.
Operation
To link multiple SSD numbers to a PSD bin:
1. Determine the SSD bin numbers to be linked
2. Lift the handset or press the ON/OFF key.
3. (A) Press the PROG key.
(B) Press the MEMORY key.
OR...
(A) Enter the Speed Dial Set/Clear code (default = 710
[UK/HK] or 710# [Taiwan, Malaysia, Indonesia]).
ICX-35-700
Action
Action
ICX (International), issued March/1999
Chapter 5. Key Telephone Features
Result
Intercom dial tone
Cleared Spd Dial displays
Result
187
Advertisement
Table of Contents
