Adjusting The Volume; Entering Characters - Panasonic KX-HDV430 Operating Instructions Manual

2.7.2 Adjusting the Volume

2.7.2 Adjusting the Volume
Adjusting the Receiver/Speaker/Headset Volume
1.
Press the [ ] or [ ] volume key to adjust the volume during a conversation.
Note
•
Both receiver volume and headset volume are adjusted in training mode. See "3.4.9 Using Training
Mode ".
Adjusting the Ringer Volume or Turning the Ringer Off
1.
In standby mode, press the [ ] or [ ] volume key to adjust the ringer volume.
2.
Tap "OK".
Adjusting the Ringer Volume or Turning the Ringer Off while Ringing
While receiving a call, do the following to adjust the ringer volume or turn the ringer off.
Note
•
If you attach a headset while receiving an incoming call, ringing will be heard from the speaker.
To adjust the ringer volume
1.
Press the [ ] or [ ] volume key to adjust the ringer volume.
Note
•
The adjusted volume level will also be used for subsequent calls.
•
The volume can also be adjusted in the pop-up window.
To turn the ringer off
1.
Tap .

2.7.3 Entering Characters

You can enter characters and digits using the dialing keys.
You can select one of the character modes by tapping the desired character mode while entering a name.
To change the character mode while editing a name in the phonebook, tap the desired character mode.
For available characters, see "5.1 Character Mode Table".
Suffix: [none] / C
(Latin)
ABC
(Numeric)
0 - 9
(Extended 1)
● Example: To enter "Anne" in Latin Mode
•
To switch between uppercase and lowercase, press
52 Operating Instructions
Suffix: NE / X / SX
(Latin)
ABC
(Numeric)
0 - 9
(Greek)
(Extended 1)
(Extended 2)
.
Suffix: RU
(Cyrillic)
(Numeric)
0 - 9
(Latin)
ABC
(Extended 1)
(Extended 2)
Document Version: 2017-08