Chapter 4 Typical Configuration; Network Requirements - H3C S1526 User Manual

User Manual
H3C S1526 Smart Ethernet Switch

Chapter 4 Typical Configuration

4.1 Network Requirements

Company A wants to establish a local-area network (LAN)
by using the S1526 switch. PCs of the Finance Dept., which
can only be used for inner purpose and cannot have Internet
access, must be isolated from PCs of other departments, which
require Internet access by connecting to an uplink switch
through the S1526 and an uplink speed of 2 Gbps. In addition,
the S1526 should be able to be managed remotely by a
management computer.
To meet the network requirements above, we can design
the network in the following way:
Use a S5000P switch as the uplink switch of the
S1526.
Set the VLAN type to 802.1Q VLAN.
Assign ports 1 to 4 (100 Mbps) to four PCs of the
Finance Dept., and add ports 1 through 4 to VLAN
200.
Assign ports 5 through 24 (100 Mbps) to the 19 PCs of
the other departments and add these ports to VLAN
10.
Add ports 25 and 26 (1000 Mbps) of the S1526 to
VLAN 10 and VLAN 1 (default management VLAN).
Connect port 25 and port 26 to the S5000P
respectively.
Chapter 4 Typical Configuration
4-1