H3C S1526 User Manual page 69

User Manual
H3C S1526 Smart Ethernet Switch
Enable port trunking on port 25 and port 26 to increase
the bandwidth.
Connect a computer to the S5000P to manage the
S1526. Note that the port to which the management
computer is connected should be in VLAN 1 (default
management VLAN).
Note:
You can also use other gigabit switch as the uplink switch of
the S1526, provided this uplink switch should support port
trunking.
Make sure to configure the port of the uplink switch to which
the S1526 is connected in VLAN 1.
You need to enable port trunking on the ports of the S5000P
connected with the S1526.
Chapter 4 Typical Configuration
4-2