H3C S1526 User Manual page 30

User Manual
H3C S1526 Smart Ethernet Switch
Note:
If you set the VLAN properties for a member port of a trunk
group, the VLAN properties of the other ports in that trunk
group will change accordingly.
If port mirroring is enabled on a port or port isolation is
enabled on the corresponding VLAN, port trunking cannot
be configured on that port.
Port trunking is not enabled for ports in the normal group.
Each trunk group supports 2 to 4 ports.
For trunking ports, the duplex mode must be full duplex, and
the speed setting must be the same and cannot be
auto-negotiation.
Example: As shown in
and 04 in trunk group 1, and select [Source & Destination
MAC-based] as the trunk algorithm.
Chapter 2 Web-based Configuration
Figure 2-13 , set ports 01, 02, 03
2-19