H3C S1526 User Manual page 26

User Manual
H3C S1526 Smart Ethernet Switch
Figure 2-11 Port setting
This page displays the basic information of each port, as
described below:
Table 2-4 Port setting item description
Item
Port
Speed
Duplex
Link
Priority
Flow
control
Port number, corresponding to the
identification on the front panel of the switch.
You can set properties of a port by clicking its
number.
Actual operating rate of the port, displayed as
"--" if this port is not connected.
The duplex mode of the port, displayed as
"--" if the port is not connected.
Indicates the linkage state of the port,
displayed as "--" if not connected.
Priority of the port.
Indicates whether flow control is enabled.
Chapter 2 Web-based Configuration
Description
2-15