Table of Contents
Advertisement
User Manual
H3C S1526 Smart Ethernet Switch
2.2.5 User Session Timeout
If your session is inactive for a certain period of time after
you log in to the Web-based NMS, you will be automatically
logged out and the system will display the [Web-based NMS
Login] dialog box shown in
made to the configuration during your session, however, will
remain on the Web page. To resume your operation, you need
to log in again.
Note:
The user session timeout time is 300 seconds.
2.3 Save Configuration
When configuring the switch, remember to save your
configurations timely
configuration information.
Click [Save Config] on the menu bar to enter a page as
shown in
Figure 2-3
confirmation dialog box. Then the configuration information of
the switch is saved to the EEPROM of the switch. The switch
will
automatically
information next time it reboots and any unsaved configuration
information will be lost.
Chapter 2 Web-based Configuration
Figure 2-1
in order to prevent the
. Click <Save> and click <Yes> on the
load
the
newly
2-7
. The changes you have
saved
configuration
loss of
Hide quick links:
Advertisement
Table of Contents
