User Manual
H3C S1526 Smart Ethernet Switch
shared among the member ports. This feature increases
bandwidth and enhances connection reliability.
Three load distribution algorithms for physical links are
available to implement port trunking: source MAC-based (SA),
destination MAC-based (DA), and source & destination
MAC-based (SA+DA).
II. Ethernet port trunking configuration
Click [Port/Trunk] to enter the [Trunk Algorithm] page, as
shown in
Figure 2-13
1)
Select a link distribution algorithm in the [Trunk
Algorithm] drop-down list.
2)
Set the quantity of trunk groups and the member
port(s) in each trunk group by selecting from the
single-selection boxes.
3)
Click <Apply> to complete the configuration.
Chapter 2 Web-based Configuration
. Follow these steps:
2-18