Table of Contents
Advertisement
Cautions:
1. Keep the
User's Guide and assembly tools for the use in adjustment or repair of
reference.
2.
After comp
lete installation, carry out a thorough inspection of connections to ensure
safety.
3.
If the ent
ire machine is unsteady due to the uneven ground or any other reason, please
adjust the regulating screw on the rear bottom tube until the entire machine is stable.
Step 7: first insert the combination of rear
bottom tube (2) in the aluminum rail (19);
then lock the hexagonal recessed pan bolt
(21) and limit bolt (20); and finally using the
cross recessed pan head tapping bolt (25),
lock the aluminum alloy guard shield (24) to
the combination of rear bottom tube (2),
with the result as shown in the bottom left
drawing.
Step 8: first connect the joint (A) of the
electronic display (12) to the joint (B) of
frame combination (1); using the cross
recessed pan head bolt (16) and plain
cushion (15), lock the electronic display
(12) to the frame combination (1);
finally, using the cross recessed pan
head tapping bolt (14), lock the
electronic meter guard shield (13) to the
electronic display (12), with the result
as shown in the top right drawing.
Advertisement
Table of Contents
