SMART Board 800i6 Configuration And User's Manual page 71

A P P E N D I X A
Remotely managing your system through a network interface
Submenu setting
Lamp Mode
Auto Power Off
Zoom
H-position (RGB input)
V-position (RGB input)
Aspect Ratio
Startup Screen
Video Mute
58
Description
Adjusts lamp brightness to Standard or Economy. Standard
displays a high-quality, bright image. Economy increases the
lamp life by decreasing the brightness of the image.
Sets the length of the auto power off countdown timer between 1
and 240 minutes. The timer begins to count down when the
projector no longer receives a video signal. The timer finishes
when the projector enters Standby mode. Select 0 to turn off the
timer.
Adjusts the zoom to the centre of the image in or out from
0 to 30.
Moves the horizontal position of the source video left or right from
0 to 100 (relative to the projected image).
N O T E
This is useful in situations where the source video is cut off.
Moves the vertical position of the source video up or down from -5
to 5 (relative to the projected image).
N O T E
This is useful in situations where the source video is cut off.
Adjusts the image output to Fill Screen, Match Input or 16:9.
Fill Screen produces an image that fills the entire screen by
l
stretching and scaling.
Match Input matches the projector's aspect ratio to the
l
input's aspect ratio. As a result, black bands might appear
along the top and bottom edges of the screen horizontally
(letterbox format) or along the left and right edges of the
screen vertically (pillarbox format).
16:9 changes the output to 16:9 by letterboxing the image,
l
which is recommended for use with HDTV and DVDs
enhanced for wide-screen television.
N O T E
See Video format compatibility on page 27 for appearance
descriptions in each mode.
Sets the type of startup screen to SMART or User. The SMART
screen is the default SMART logo on a blue background. The User
screen uses the saved picture from the Capture User Startup
Screen function.
Turns the video mute setting on or off. Select On to hide the
display and Off to show it again.