Overcasting Stitch - JUKI HZL-G220 Instruction Manual

Overcasting stitch

Attention
Turn OFF the power switch before replacing the presser foot.
This stitch is used to prevent the edge of fabric from fraying.
Overcasting stitch 1
Overcasting stitch 3
Pattern
Practical 06
No.
Presser Overcasting
foot presser foot (C)
Push the fabric towards the
guide and sew. If the fabric and
guide are apart, it will not make
a nice stitch formation. Make
sure to guide the fabric along
the guide and sew slowly.
* Before sewing, make sure to
check that the needle will not
hit the presser foot.
Practical 15
Pattern
(Light-weight
No.
material)
Presser Overcasting
foot presser foot (C)
This overcasting stitch is used
for overcasting light-weight ma-
terials.
Guide the fabric along the
guide and sew.
* Before sewing, make sure to
check that the needle will not
hit the presser foot.
Overcasting stitch 2
* Before sewing, make sure to
Overcasting by 3-point zigzag
* Do not use overcasting
Pattern
Practical 14
No.
Presser Overcasting
foot presser foot (C)
This stitch is used for overcast-
ing medium- to heavy-weight
materials.
Guide the fabric along the
guide and sew.
check that the needle will not
hit the presser foot.
Pattern
Practical 04
No.
Presser Standard presser
foot foot (A)
presser foot (C).
This stitch is used to prevent
the cut edge of fabric from fray-
ing.
Keep some seam allowance
and cut the sewn fabric care-
fully so that stitches are not cut
by the scissors.
27