Battery Change - Drayton LP10RF Installation & User Manual

When the delay period is operating indicated by the flame symbol
flashing (Fig12), pressing any button returns the Digistat +2RF to
auto mode allowing normal button operation until the next time/
temperature event, when it will resume the delay start mode or
follows the Holiday, Manual, Override or Off modes as selected.
User Guide
Changes to the installer options and pre-set programmes must be
made with the flame symbol not flashing.
(Fig 12)
Fig 9
What is Intelligent delayed start?
What is Intelligent delayed start?
Intelligent Delayed Start (Energy saving feature)
Intelligent Delayed Start
The Intelligent Delayed Start is an energy saving feature which
(Energy saving feature)
automatically reduces the warm up time for the heating system. As
the weather becomes milder, Intelligent Start will delay the heating
The Intelligent Delayed Start is an energy saving feature
start times so that the fuel is not wasted bringing the room up to
which automatically reduces the warm up time for
temperature earlier than necessary.
the heating system. As the weather becomes milder,
Intelligent Start will delay the heating start times so
that the fuel is not wasted bringing the room up to
temperature earlier than necessary.

Battery Change

How do I know when to change the batteries.
When the batteries start to run low a battery icon will
flash in the display, to indicate "low battery" during this
time the Digistat will function normally.
LP10RF & DIGISTAT+2RF
Client Drayton
Artworker -
Creative Director Mike Lane
Modification Date 21/08/15 2:56PM
DIGISTAT+2RF Room Thermostat
Replace with 2 x 1.5V (AA) Alkaline batteries.
When the battery icon alone is shown in the display, the
batteries are completely exhausted and the Digistat will
cease to function. Re-activate by replacing the batteries
The RF link will automatically be re-established.
How to replace the batteries
Remove the battery cover using a coin. Replace the spent
batteries with 2 x 1.5V (AA) Alkaline batteries ensuring
correct orientation. Replace the battery cover pressing
fully home.
File Name 7542 Drayton LP10RF & DIGISTAT+2RF 06515086001 ISSC
PRINT
Proof Stage
Finished Size A5 148x210mm
Artwork % 100%
Bleed 3mm
19