Toshiba E-studio 207L Operation Manual page 96

4 EDITING FUNCTIONS
Adjust the width of the binding margin.
5
1) Press [FRONT MARGIN] and adjust the binding margin width on the front side using [
and [ 100 mm] (3.94"). (The width on the back side will be also adjusted in the same way.)
2) Press [BACK MARGIN] and adjust the binding margin width on the back side using [
and [ 100 mm] (3.94"). (Only the width on the back side will be adjusted.)
3) Press [OK].
Note that a left/right binding margin will be created on the opposite side on the back side of paper in
duplex copying. (For example, when a binding margin is created on the right of the front side of the
paper, it will be created on the left of the back side.)
Press [OK].
6
Select other copy modes as required, and then press the [START] button on the control
7
panel.
94 Image Shift
0 mm] (0")
0 mm] (0")